171 research outputs found
Investigation of the thermophysical properties of high-melting materials with the aid of a complex of instruments
The evaporation rate, vapor pressure, heats of evaporation reaction (sublimation, dissociation), enthalpy, electrical resistance, heat capacity, emissivity, and heat conductivity of various carbides, borides, sulfides, nitrides, selenides, and phosphides were investigated. A set of high temperature high vacuum devices, calorimeters (designed for operation at 400 to 1300 K and from 1200 K), and mass spectrometers, most of which were specially developed for these studies, is described
Nanostructuring Graphene by Dense Electronic Excitation
The ability to manufacture tailored graphene nanostructures is a key factor
to fully exploit its enormous technological potential. We have investigated
nanostructures created in graphene by swift heavy ion induced folding. For our
experiments, single layers of graphene exfoliated on various substrates and
freestanding graphene have been irradiated and analyzed by atomic force and
high resolution transmission electron microscopy as well as Raman spectroscopy.
We show that the dense electronic excitation in the wake of the traversing ion
yields characteristic nanostructures each of which may be fabricated by
choosing the proper irradiation conditions. These nanostructures include unique
morphologies such as closed bilayer edges with a given chirality or nanopores
within supported as well as freestanding graphene. The length and orientation
of the nanopore, and thus of the associated closed bilayer edge, may be simply
controlled by the direction of the incoming ion beam. In freestanding graphene,
swift heavy ion irradiation induces extremely small openings, offering the
possibility to perforate graphene membranes in a controlled way.Comment: 16 pages, 5 figures, submitted to Nanotechnolog
Selective ion sieving through arrays of sub-nanometer nanopores in chemically tunable 2D carbon membranes
Two-dimensional (2D) membranes featuring arrays of sub-nanometer pores have applications in purification, solvent separation and water desalination. Compared to channels in bulk membranes, 2D nanopores have lower resistance to transmembrane transport, leading to faster passage of ions. However, the formation of nanopores in 2D membranes requires expensive post-treatment using plasma or ion bombardment. Here, we study bottom-up synthesized porous carbon nanomembranes (CNMs) of biphenyl thiol (BPT) precursors. Sub-nanometer pores arise intrinsically during the BPT-CNM synthesis with a density of 2 ± 1 pore per 100 nm2. We employ BPT-CNM based pore arrays as efficient ion sieving channels, and demonstrate selectivity of the membrane towards ion transport when exposed to a range of concentration gradients of KCl, CsCl and MgCl2. The selectivity of the membrane towards K+ over Cl− ions is found be 16.6 mV at a 10 : 1 concentration ratio, which amounts to ∼30% efficiency relative to the Nernst potential for complete ion rejection. The pore arrays in the BPT-CNM show similar transport and selectivity properties to graphene and carbon nanotubes, whilst the fabrication method via self-assembly offers a facile means to control the chemical and physical properties of the membrane, such as surface charge, chemical nature and pore density. CNMs synthesized from self-assembled monolayers open the way towards the rational design of 2D membranes for selective ion sieving
Rhodium-Complex-Functionalized and Polydopamine-Coated CdSe@CdS Nanorods for Photocatalytic NAD+ Reduction
[Image: see text] We report on a photocatalytic system consisting of CdSe@CdS nanorods coated with a polydopamine (PDA) shell functionalized with molecular rhodium catalysts. The PDA shell was implemented to enhance the photostability of the photosensitizer, to act as a charge-transfer mediator between the nanorods and the catalyst, and to offer multiple options for stable covalent functionalization. This allows for spatial proximity and efficient shuttling of charges between the sensitizer and the reaction center. The activity of the photocatalytic system was demonstrated by light-driven reduction of nicotinamide adenine dinucleotide (NAD(+)) to its reduced form NADH. This work shows that PDA-coated nanostructures present an attractive platform for covalent attachment of reduction and oxidation reaction centers for photocatalytic applications
Water-soluble ionic carbon nitride as unconventional stabilizer for highly catalytically active ultrafine gold nanoparticles
Ultrafine metal nanoparticles (NPs) hold promise for applications in many fields, including catalysis. However, ultrasmall NPs are typically prone to aggregation, which often leads to performance losses, such as severe deactivation in catalysis. Conventional stabilization strategies (e.g., immobilization, embedding, or surface modification by capping agents) are typically only partly effective and often lead to loss of catalytic activity. Herein, a novel type of stabilizers based on water-soluble ionic (K and Na containing) polymeric carbon nitride (i.e., K,Na-poly(heptazine imide) = K,Na-PHI) is reported that enables effective stabilization of highly catalytically active ultrafine (size of ∼2–3 nm) gold NPs. Experimental and theoretical comparative studies using different structural units of K,Na-PHI (i.e., cyanurate, melonate, cyamelurate) indicate that the presence of functionalized heptazine moieties is crucial for the synthesis and stabilization of small Au NPs. The K,Na-PHI-stabilized Au NPs exhibit remarkable dispersibility and outstanding stability even in solutions of high ionic strength, which is ascribed to more effective charge delocalization in the large heptazine units, resulting in more effective electrostatic stabilization of Au NPs. The outstanding catalytic performance of Au NPs stabilized by K,Na-PHI is demonstrated using the selective reduction of 4-nitrophenol to 4-aminophenol by NaBH as a model reaction, in which they outperform even the benchmark “naked” Au NPs electrostatically stabilized by excess NaBH. This work thus establishes ionic carbon nitrides (PHI) as alternative capping agents enabling effective stabilization without compromising surface catalysis, and opens up a route for further developments in utilizing PHI-based stabilizers for the synthesis of high-performance nanocatalysts
Microscopic View on Short-Range Wetting at the Free Surface of the Binary Metallic Liquid Gallium-Bismuth: An X-ray Reflectivity and Square Gradient Theory Study
We present an x-ray reflectivity study of wetting at the free surface of the
binary liquid metal gallium-bismuth (Ga-Bi) in the region where the bulk phase
separates into Bi-rich and Ga-rich liquid phases. The measurements reveal the
evolution of the microscopic structure of wetting films of the Bi-rich,
low-surface-tension phase along different paths in the bulk phase diagram. A
balance between the surface potential preferring the Bi-rich phase and the
gravitational potential which favors the Ga-rich phase at the surface pins the
interface of the two demixed liquid metallic phases close to the free surface.
This enables us to resolve it on an Angstrom level and to apply a mean-field,
square gradient model extended by thermally activated capillary waves as
dominant thermal fluctuations. The sole free parameter of the gradient model,
i.e. the so-called influence parameter, , is determined from our
measurements. Relying on a calculation of the liquid/liquid interfacial tension
that makes it possible to distinguish between intrinsic and capillary wave
contributions to the interfacial structure we estimate that fluctuations affect
the observed short-range, complete wetting phenomena only marginally. A
critical wetting transition that should be sensitive to thermal fluctuations
seems to be absent in this binary metallic alloy.Comment: RevTex4, twocolumn, 15 pages, 10 figure
Charge-state-enhanced ion sputtering of metallic gold nanoislands
Experimental results on the charge-state-dependent sputtering of metallic gold nanoislands are presented. Irradiations with slow highly charged ions of metallic targets were previously considered to show no charge state dependent effects on ion-induced material modification, since these materials possess enough free electrons to dissipate the deposited potential energy before electron-phonon coupling can set in. By reducing the size of the target material down to the nanometer regime and thus enabling a geometric energy confinement, a possibility is demonstrated to erode metallic surfaces by charge state related effects in contrast to regular kinetic sputtering
- …